- 电压击穿试验仪
- 介电常数
- 电阻率测试仪
- 粉末电阻率测试仪
- 导体、半导体电阻率
- 耐电弧测试仪
- 漏电起痕试验仪
- 电池隔膜电弱点测试仪
- 橡胶塑料检测仪器
- 力学性能检测仪器
- 落球回弹试验仪,介电击穿强度测定仪:海绵泡沫材料检测仪器
- 受电弓/碳滑板检测仪器
- 落球回弹试验仪,介电击穿强度测定仪:材料热物理性能实验设备
- 热物性检测仪器
-
粉末测试设备
-
霍尔流速计
-
真密度测试仪
-
斯柯特容量计
-
休止角测定仪
-
粉末压实密度仪
-
振实密度测试仪
-
颗粒图像分析仪
-
全自动真密度仪
-
塑料流动性测定仪
-
粉尘安息角测试仪
-
多功能压力测量系统
-
粉末自然堆积密度仪
-
粉体综合物性测试仪
-
氧化铝流动角测定仪
-
落球回弹试验仪,介电击穿强度测定仪:塑料表观密度测试仪
-
落球回弹试验仪,介电击穿强度测定仪:普通磨料堆积密度仪
-
落球回弹试验仪,介电击穿强度测定仪:白土堆积密度测定仪
-
氧化铝流动时间测定仪
-
落球回弹试验仪,介电击穿强度测定仪:压实密度粉末电阻率仪
-
陶粒砂体积密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:氧化铝松装密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:表面活性剂表观密度仪
-
自由流动堆积密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:超硬材料堆积密度测定仪
-
霍尔流速计
- 比表面测试仪
- 电池检测
- 燃烧性能试验机
- 金属检测仪器
-
焙烧炉试验机
ASTMD495耐高压低电流电弧放电试验机
高额定电压小电压校正仪(耐电弧放电校正仪)-(算机保持)
High voltage low current tester (arc resistance tester) - (computer control)
成商品编码称:耐电弧试验机
Product name: electric arc resistance tester
品牌参数:NDH-A
Product model: NDH - A
足够规范标准:GB/T 1411-2002《固态垃圾隔绝文件耐高放低功率电孤电流的实验设计》(等一起IEC 61621-1997)及ASTM D495等的标准的的要求方案制做的,并包含IEC 149、UL
Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc
一 概述
一An overview of the
基本适用于规模及实用功能:
本实验室检测机是确定软件应中用伺服电机、水取暖器电气和水取暖器水取暖器电气等服务行业的技工用塑胶片、硅胶粘合剂胶和接地漆等接地装修的原材料的耐电弧放电放电功能评选,主中用固体颗粒接地装修的原材料如:塑胶片、塑料膜、硅胶粘合剂、黑云母、淘瓷、窗户玻璃、接地油、接地漆、纸箱等物料的耐电弧放电放电功能测评;
本试验设计机由确定机调节自动运行,可展示某个试验状况及试验准确时间,试验截止后并包存某个试验数据表格,并可打印出.准则试验报告单。
Main scope of application and features:
This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;
This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report
二 功能特点
1 该设备为前后左右混合式格局,下面为运行系统,上半部为试验检测箱。
2 本新产品挑选*新智慧把握枝术,能够挑选步骤(IEC或ASTM)可自行采取试验装置,并在笔记本我的电脑显示信息现场实验进程和結果。
3 **特点优良,抗电磁干扰力强,测试软件精密度较高。
二:Functional features:
1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.
2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.
3 good safety performance, strong anti-interference ability, high test precision.
三 主要技术参数
1 焊弧通断时长粗差:大于 ±10ms
2 调压器出水量:2kVA
3 額定应力测试电流:12.5kV
4 冲击试验工作电压误差:±3%
5 电压电流调控gps精度:±10% 电流大小预估精确度:1.5%
6 工业对样品压力差:(0.5±0.05)N
7 参比电极原料:钨棒
8 探针距里:(6.35±0.1)mm(IEC)
(6.0±0.1)mm(ASTM)
9 利用自然环境工作温度:(23±2)℃
10 食用生态温度湿度:(50±5)%
11 电原:220V±5% 50Hz
12 测试 手段: 新国标/美标/10 mA 联续/20 mA 多次/30 mA连续式/40 mA间隔
13 测试小程序以下:
| 源程序段 | 焊弧直流电压 mA | 焊弧通断时期s | 各环节段一直用时s | 实验总周期s | |
| | | IEC 61621 | ASTM D495 | | |
| 1 | 10 | 1/8s通 7/8s断 | 1/4s通 7/4s断 | 60 | 60 |
| 2 | 10 | 1/4s通 3/4s断 | 1/4s通 3/4s断 | 60 | 120 |
| 3 | 10 | 1/4s通 1/4s断 | 1/4s通 1/4s断 | 60 | 180 |
| 4 | 10 | 不间断通 | 60 | 240 | |
| 5 | 20 | 连续式通 | 60 | 300 | |
| 6 | 30 | 连继通 | 60 | 360 | |
| 7 | 40 | 持续通 | 60 | 420 | |
Three main technical parameters:
Error: 1 arc on-off time less than plus or minus 10 ms
Transformer capacity: 2 kva
3 test voltage rating: 12.5 kV
4: test voltage accuracy + / - 3%
5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%
6 electrode pressure on sample: (0.5 + 0.5) N
7 electrode materials: tungsten rods
8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)
9 using the environment temperature (23 + 2) ℃
10 use environment humidity: (50 + 5) %
Power supply: 220 v + 5% for 50 hz 10 a
Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous
13 test procedure is as follows:
Procedures section of the arc current
MA arc on-off time s the program s test total duration time s
IEC 61621 ASTM D495
1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s
2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s
3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s
4 consecutive 10 to 60, 240
5 20 consecutive 60, 300
30 consecutive 6 to 60, 360
7 consecutive 40 to 60, 420
四 配置
| 号码 | 明称 | 总数量 | 微信备注名 |
| 01 | 耐电孤测试方法仪 | 一个 | |
| 02 | 电级装置 | 一台 | |
| 03 | 探针橡胶支座 | 有一套 | |
| 04 | 24v电源电力电缆 | 1套 | |
| 05 | 接地线放** | 1支 | |
| 06 | 瞬时电流毫安表 | 整台 | |
| 07 | 新电脑测控电脑软件 | 一系列 | |
| 08 | 试件材料架 | 每支 | |
| 09 | 金属电极的距离标准规范块 | 2块 | |
| 10 | 方向角标准单位块 | 2块 | |
| 11 | 陶瓷制品片 | 2片 | |
| 12 | 喷墨直接彩色打印机 | 1台 | 的品牌 |
| 13 | 核算机 | 1台 | 产品 |
| 14 | 操作原因分析书 | 1份 | |
| 15 | 合格证书书证 | 1份 | |
Four configuration:
Serial number name number note
01 arc resistance tester
02 a electrode system
03 electrode bearing a set
04 a set of power cable
05 ground put a rod
06 milliammeter current one
7 a set of computer measurement and control software
08 specimen holder a
09 electrode distance standard 2 blocks
Standard 2 blocks of 10 Angle
11 ceramic pieces 2 pieces
12 one brand inkjet printer
13 1 computer brand
14 1 instruction manual
15 1 certificate
五 护肤品款式:
NDH-A 耐电弧焊接测试仪-微机的控制
NDH-B 耐电孤经过多次实验发现仪-摸屏调控
Five product model:
NDH - A arc resistance tester - microcomputer control
NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!